Back to All Downloads

V-RAPTOR 8K VV FIRMWARE

release history

VERSION 1.7.5

|

208 MB

Release Date:

4/25/2024

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select Upgrade.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.6.2

  • Added V-RAPTOR [X] and V-RAPTOR XL [X] Support
  • Added RED COMPACT EVF support
  • Added Video Overlays
  • Added Horizon and Tilt Video Overlay
  • Added Calibrate Gyroscope function
  • Added advanced Image Flip selection
  • Added ASC MHL checksum option
  • Added Function Toggle control
  • Added Proxy Record Menu
  • Added ProRes Proxy Codec
  • Added Dedicated False Color and Peaking Assignable Buttons
  • Added Additional Slate Fields
  • Added Remount Media Command
  • Added Operations Guide QR Code
  • Added SmallHD RED Touch OS 5.5.3
  • Added ProGrade Gold 1TB/2TB Support
  • Added Novachips 2TB support
  • Fixed SmallHD ND Assignable Buttons (PageOS 5.5.3)
  • Fixed Intermittent SDI Timecode with External TC
  • Fixed Extended Highlights not achieving maximum fps (V-RAPTOR [X])
  • Fixed incorrect 2K Format Heights (V-RAPTOR [X])
  • Fixed incorrect Edge Timecode after exiting Playback
  • Fixed SDI frequency changing after recording a clip
  • Fixed Phantom Track monitor switching
  • Fixed RAW RGB Exposure meter in EH mode
  • Fixed EVF SDI Resolution/Frequency selections (V-RAPTOR XL/XL [X])
  • Fixed RED thumbnail generation in EH mode
  • Fixed Low Power shutdown

OPERATIONAL NOTES

Copyright (c) 2004-2024 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.6.2

|

208 MB

Release Date:

10/27/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select Upgrade.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.5.4

  • Added Face Detection Beta for Auto Focus
  • Added In-camera Online Firmware Upgrade method
  • Added Advanced Playback Controls
  • Added RED Connect SMPTE ST 2110-22
  • Added RED Connect Return Feed (SMPTE ST 2110-20)
  • Added RED Connect NMOS support
  • Added multiple Calibration management
  • Added ISO Display Mode Gain (dB)
  • Added Remote Shutdown command
  • Added mDNS discovery via Camera Name
  • Added Web UI for S3 credentials
  • Added clipname to HANC data during playback
  • Added DSMC3 RED Touch 7" 5.5.0 firmware
  • Added DSMC3 RED Touch 7" GIO Scope Interface (5.5.0)
  • Added ability to disable DSMC3 RED Touch 7" Page System (5.5.0)
  • Added edit list functionality to DSMC3 RED Touch 7" (5.5.0)
  • Added OWC Atlas Ultra 1TB/2TB support
  • Added SanDisk PRO-CINEMA 640GB support
  • Fixed possible incorrect LUT on playback
  • Optimized RCP outgoing messages
  • Improved PTP locking
  • Improved playback transition on DSMC3 RED Touch 7" (5.5.0)

OPERATIONAL NOTES

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.5.4

|

201.2 MB

Release Date:

9/12/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.5.2

  • Added DSMC3 RED TOUCH 7.0" FW 5.4.2
  • Fixed DSMC3 RED TOUCH 7.0" playback controls not showing
  • Fixed some batteries causing unexpected shutdowns

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.5.2

|

196.3 MB

Release Date:

6/7/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.4

  • Added support for RED RF TO PL ADAPTER W/ ELECTRONIC ND
  • Added RED Connect License support
  • Added ability to edit FPS, Shutter, and Format lists.
  • Added upcoming clip filename to SDI HANC while in preview
  • Added Format Dimensions status
  • Added RF Iris Compensation
  • Added ND control to assignable buttons list
  • Added ND Increments to Lens & Histogram Page
  • Added DSMC3 RED TOUCH 7.0" FW 5.4.1
  • Added RED Pro CFexpress 1TB support
  • Added Angelbird AV PRO CFexpress 1TB MK2 support
  • Added RED PRO 1TB support
  • Added OWC 1.3TB support
  • Added Prograde 1.3TB support
  • Added firmware update prompt and automatic restart
  • Added firmware update over USB Type-C
  • Fixed proxy timecode offset under certain formats
  • Fixed intermittent Gold Mount battery communication
  • Fixed Absolute Frame Guide when values are outside the format limits
  • Fixed R3D timecode mismatch in camera array
  • Fixed stuck pixels in 7K 3:2 1.6x/1.8x format
  • Fixed inconsistent Iris values on lens swap
  • Improved V-RAPTOR XL DC-IN power handling
  • Improved RCP2 CDL control
  • Improved Cloud Upload File Types menu
  • Improved ND Stop Display Mode
  • Improved External Only Audio over SDI
  • Improved Network Static IP setup
  • Improved DC IN low voltage warning interface

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.4.4

|

182.8 MB

Release Date:

2/23/2023

Release Notes

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.2

  • Added Nextorage 660GB and 1.3TB support
  • Improved support for third party battery plates

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.4.2

|

182.7 MB

Release Date:

1/18/2023

Release Notes

V-RAPTOR Release Build 1.4.2 January 18, 2023

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.1beta

  • None

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.0beta

  • Added V-RAPTOR 8K S35 Support
  • Added access to Cloud Upload menu without media inserted

SIGNIFICANT CHANGES SINCE RAPTOR 1.3.4

  • Added V-RAPTOR 8K S35 Support
  • Added access to Cloud Upload menu without media inserted
  • Added Cloud Upload capability (Frame.io and S3)
  • Added DSMC3 RED Touch 7" OS 5.1 upgrade
  • Added TCP Streaming Option for RED Connect
  • Added OWC 325GB and 640GB support
  • Added Lexar Professional 1TB and 2TB support
  • Added Wise 640GB support
  • Improved Sensor Flip Calibration Process
  • Fixed Side UI battery percentage accuracy
  • Fixed incorrect ND value during Playback
  • Fixed blank LCD when first entering Playback

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.3.4

|

149.8 MB

Release Date:

9/27/2022

Release Notes

V-RAPTOR Release Build 1.3.4 September 27, 2022

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RELEASE 1.2.7

  • Added ELQ R3D Quality
  • Added RED CONNECT (BETA) - Full Resolution Live R3D Streaming (See Operational Notes Below)
  • Added AF Improvements
  • Added Quiet Record Fan Control
  • Added DSMC3 Monitor through-camera firmware update support (Requires SmallHD OS5 or later)
  • Added enhanced timecode behavior
  • Added User calibration optimization reducing process from several minutes to approximately 30 seconds
  • Added discrete monitor LUT support
  • Added Basic, Standard and Technical overlay mode
  • Added Tint to SDI Advanced Overlay
  • Added Overlay Opacity control
  • Added voltage display for non-communicating batteries
  • Added Low Voltage Warning control
  • Added QR code support for Wi-Fi passwords
  • Added RCP2 external lens data support
  • Added 'Auto' to Top LCD Resolution menu
  • Added RED PRO 1.3TB and 4TB support
  • Added Angelbird AV PRO MK2 660GB, 1320GB, 2TB and 4TB support
  • Added Exascend Archon 2TB CFx support
  • Added ProGrade 325GB and 650GB support
  • Fixed custom preset disappearing when assigned to user page
  • Fixed unintended RF lens motor movement in manual mode
  • Fixed Sigma Cine lens communication issue
  • Fixed incorrectly displayed minimum lens F stop
  • Fixed incorrect scrolling text
  • Fixed issue with Sensor Flip calibration
  • Fixed horizontal tear in 4K 8:1 at HFR
  • Fixed horizontal tear in Flip/Mirror mode
  • Fixed 'low speed' message with SanDisk CFx card
  • Fixed refresh of LUT menu after import or delete
  • Fixed slow/stalled playback of long clip
  • Fixed EF lens detection on startup in AF mode
  • Fixed CFx Time Indicator on startup
  • Fixed Livestream freeze after disabling
  • Fixed no static IP after reboot
  • Changed PPP Baud Rate and IP Address string in UI
  • Changed user calibration dialog to include time estimate
  • Removed BETA from Autofocus feature
  • Improved SDI Latency

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2022 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.2.7

|

131.4 MB

Release Date:

7/8/2022

Release Notes

V-RAPTOR Release Build 1.2.7 July 8, 2022

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE PREVIOUS RELEASE

  • Hardware compatibility update

SIGNIFICANT CHANGES SINCE RELEASE 1.1.2

  • Added Angelbird 2TB AV PRO CFexpress MK2 support
  • Fixed potential stuck pixels with Exascend 1TB Archon card
  • Fixed camera lockup switching formats with AF enabled
  • Added Apple ProRes support
  • Added Apple ProRes proxy support
  • Added 4K 8:1 format support
  • Added Timelapse record support
  • Added Frame Limit support
  • Added Sync Out and Tally GPIO support
  • Added shutter up/down assignable buttons
  • Added preset 'All Image/LUT and Project Settings'
  • Added Sensor Sync Shift support
  • Added Exascend Archon 1TB support
  • Added ProRes Color Profile support
  • Added 5Gbps USB-C Ethernet adapter support
  • Added selectable MTU support
  • Added undercranked frame rates to FPS list
  • Fixed Iris list for Canon RF 800mm f/11 lens
  • Fixed no audio detected on SDI CH3/4
  • Fixed AF operation after sensor flip/mirror is changed
  • Fixed camera hang after rapid record button depress with undercranked frame rates
  • Fixed USB-C Static IP address on power up
  • Fixed Livestream image freeze with multiple clients
  • Fixed Image/LUT Display Preset based on SDI 1 setting

OPERATIONAL NOTES

  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2022 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.2.6

|

131.4 MB

Release Date:

2/22/2022

Release Notes

V-RAPTOR Release Build 1.2.6 February 22, 2022

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE PREVIOUS RELEASE

  • Hardware compatibility update

OPERATIONAL NOTES

  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2022 RED Digital Cinema, LLC. All Rights Reserved

VERSION 1.2.5

|

131.3 MB

Release Date:

2/15/2022

Release Notes

V-RAPTOR Release Build 1.2.5 February 15, 2022

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE 1.1.2

  • Added Apple ProRes support
  • Added Apple ProRes proxy support
  • Added 4K 8:1 format support
  • Added Timelapse record support
  • Added Frame Limit support
  • Added Sync Out and Tally GPIO support
  • Added shutter up/down assignable buttons
  • Added preset 'All Image/LUT and Project Settings'
  • Added Sensor Sync Shift support
  • Added Exascend Archon 1TB support
  • Added ProRes Color Profile support
  • Added 5Gbps USB-C Ethernet adapter support
  • Added selectable MTU support
  • Added undercranked frame rate support
  • Added Angelbird 2TB AV PRO CFexpress MK2 support
  • Added RED PRO CFexpress 2TB support
  • Fixed Iris list for Canon RF 800mm f/11 lens
  • Fixed no audio detected on SDI CH3/4
  • Fixed AF operation after sensor flip/mirror is changed
  • Fixed USB-C Static IP address on power up
  • Fixed Livstream image freeze with multiple clients
  • Fixed Image/LUT Display Preset based on SDI 1 setting
  • Fixed potential stuck pixels with Exascend 1TB Archon card
  • Fixed camera lockup switching formats with AF enabled

OPERATIONAL NOTES

  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2022 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.1.2

|

130.8 MB

Release Date:

11/4/2021

Release Notes

V-RAPTOR Release Build 1.1.2 November 4, 2021

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE 1.1.1

  • Fixed unresponsive power switch

SIGNIFICANT CHANGES SINCE 1.1.0beta

  • Fixed data/time reset on boot
  • Fixed record error at 2K 600fps
  • Fixed False Color Video mode after re-enabling
  • Fixed missing RED HANC data
  • Fixed invalid SDI LTC metadata

OPERATIONAL NOTES

  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2021 RED Digital Cinema, LLC. All Rights Reserved.